Crate Palomino V32

Crate Palomino V32

Crate Palomino V32

This is a great little amp. While this came from the guitar player in my band, he wasn’t the original owner and we aren’t real sure of the year it was made. But, I feel like it was early  2000’s. It does have a replacement end on the power cord that isn’t shown. Someone cut the ground lug off so I replaced the end. It also shows its age and use, but I’ve heard this amp at gigs and it rocks. It has that classic tube sound at a very affordable price. Don’t let this one get away!

Buy it here!

Here is the original sales description/specs:

________________________________________________________________________

Righteous tube tone and 30W Class A power!

The Palomino V32 Amp is a hot little single 12″ combo amplifier that kicks serious butt. It’s an all-tube, 30W class A amp featuring four EL-84 tubes in the power section. Very solid construction with searing tone that will get you in the ZZ Top, AC/DC, Led Zep, Ted Nugent, Allman Bros, classic blues-rock frame of mind in an instant. Plug an LP or a 335 into the V32 combo and you won’t be able to suppress a smile when you hear this amp perform. White Tolex covering with wheat grille gives the Palomino V32 a boutique look.

 

FEATURES
  • Class A 30W
  • 4 – El-84 power tubes
  • 3 – 12AX7A preamp tubes
  • Spring reverb
  • Clean/overdrive switch
  • Boost switch
  • Bass, mid, treble, and presence tone controls
  • 12″ speaker
SPECIFICATIONS
  • OUTPUT POWER RATING
  • 30W RMS @ 6 % THD, 8 ohm load, 120 VAC
  • SIGNAL TO NOISE RATIO
  • 71dB Typical
  • GAIN
  • Clean 56dB, Overdrive 101dB
  • TREBLE
  • 12dB range @ 6kHz
  • BOOST
  • +10dB @ 900Hz
  • MID
  • 10dB range @ 1kHz
  • BASS
  • 8dB range @ 150Hz
  • PRESENCE
  • +8dB @ 10kHz
  • PREAMP TUBES
  • (3) 12AX7A
  • POWER AMP TUBES
  • (4) EL-84
  • POWER REQUIREMENTS
  • 120 VAC, 60 Hz, 35VA
  • 100/115 VAC, 50/60 Hz, 35VA
  • 230 VAC, 50/60 Hz, 35VA

Comments are closed.

Post navigation

  Next Post :
Previous Post :